Chinese translation for "ageing hardening"
|
- 时效硬化
Related Translations:
- Example Sentences:
| 1. | We call this rise in strength " age hardening .
这种强度的增加我们称为“时效硬化” 。 | | 2. | Age hardening stainless steel
时效硬化不锈钢 | | 3. | Effect of be on ageing hardening behavior and oriented relation between precipitated phases and matrix of 7475 aluminum alloy
低中高温再多级时效处理对7175铝合金组织和性能的影响 | | 4. | The age hardening characteristic of as - cast cu20ni20mn and cu20ni35mn alloys and the interface characteristic between the alloy and cast tungsten carbide were studied , and on the basis of this study , composites of cu - ni - mn alloy reinforced with different volume fraction ( 0 - 45vol . % ) and different size ( 42 - 362 m ) of cast tungsten carbide particles were made by vacuum hot - pressing liquid sintering technology . pin on disk two body abrasion tests have been performed with different size of sic abrasive under different loads
本文研究了铸态cu20ni20mn和cu20ni35mn合金的时效硬化特性及其与铸造碳化钨的界面特性，并在此基础上以不同尺寸( 42 362 m )的铸造碳化钨颗粒为增强体，采用真空热压液相烧结技术制备了不同颗粒含量( 0 45vol . )的铸造碳化钨颗粒增强cu - ni - mn合金基复合材料；以不同粒度的sic为磨料，在不同载荷条件下利用销?盘磨损试验机测试了复合材料的二体磨料磨损性能。 | | 5. | The time taken to reach maximum hardness decreased and the corresponding maximum hardness decreased with increasing aging temperature . the better properties of al - mg - si - mn - cr alloy were obtained after 8h at 175 ' c . the al - mg - si - mn - cr alloy resembles al - mg - si alloy in the way of the age hardening mechanism
在同一温度下，随着时效时间的延长，合金硬度逐渐上升，在达到时效硬度峰值后又逐渐降低，随着时效温度的升高，中南大学硕士学位论文川mg st mn cr合金组织与性能的研究合金达到时效硬度峰值的时间缩短，而相应的时效硬度峰值在减小。 |
- Similar Words：
- "ageing error" Chinese translation, "ageing failure; wear-out failure" Chinese translation, "ageing fault; wear-out fault" Chinese translation, "ageing fleet of aircraft" Chinese translation, "ageing fog" Chinese translation, "ageing hardness" Chinese translation, "ageing index" Chinese translation, "ageing induced crack" Chinese translation, "ageing loss" Chinese translation, "ageing mechanism" Chinese translation
|
|
|
